认 证：工商信息已核实
访问量：332862
邮 编：2300088
联系人：谢经理
电 话：0551-65146333 17354094989
传 真：
邮 箱：
主要特点Main features:
1) Can pull in the required high tem. to sample to get a rapid heating rate; also pull out the high tem. furnace and let the sample in the room tem. Environment to get a rapid cooling rate.
操作时可将实验需要的恒定高温直接推到样品处，使样品能得到一个快速的升温速度，同样也可将高温的管式炉直接推离样品处，使样品直接暴露在室温环境下，得到快速的降温速率。
2) Used for graphene growing or CVD experiment with RTP requirement
应用于有快速升温需要的石墨烯生长或CVD实验。
技术参数Technical Parameters
Power 输入电源 | Power rated: 3KW 额定功率：3KW |
Voltage 电压 | Voltage rated: AC208-240V 50/60HZ 额定电压： AC208-240V 50/60HZ |
Working Temperature 工作温度 | Max. Temperature: 1200℃( 1 hr) **温度：1200℃ (1小时) Continuous working temperature: ≤1100℃ 持续工作温度：≤1100℃ Max. Heating/colling Rate: ≤20℃/S 升温速率：≤20℃/秒 |
控温方式 | PID automatic control and auto-tune function. 模糊PID控制和自整定调节 30 programmable segments for precise thermal processing. 智能化30段可编程控制 Built-in protection for the over-heated and broken thermocouple. 超温和断偶报警功能 |
Length of heating zone 加热区长度 | 200+200mm |
Length of constant zone 恒温区长度 | 100+100mm |
Heating Elements 加热元件 | Resistance wire, Fe-Cr-Al Alloy doped by Mo 电阻丝（掺钼铁铬铝合金） |
Temperature Accuracy 控温精度 | +/- 1℃ |
Processing tube 炉管 | Φ50/60/80/100*1400mm(optional) Φ50/60/80/100*1400mm(管径可选) Two tube blocks are included for blocking heat radiation generated from tube center.,must be fully inserted into the furnace chamber before heating(quartz or ceramic optional). 两个氧化铝管堵阻挡管中心产生的热辐射，管堵必须在加热前塞进炉膛的正确位置(石英或氧化铝管堵可选) |
Dimensions 尺寸 | Furnace size :1500*380*620mm(L*W*H without tube & flange) 炉子尺寸：1500*380*620mm(长*宽*高 不含炉管和法兰) |
Net Weight 净重 | 130kg |
真空法兰 | KF25 quick clamp flange 两端为KF25快速卡箍法兰 |
Vacuum Pressure 真空压力 | 1pa can be achieved by mechanical pump 机械泵可达1pa 10^-4 pa can be reached by molecular pump 分子泵可达10^-4pa Please click the picture below to order vacuum parts 点击下列图片订购真空部件 |
Warranty 质保 | One year limited warranty with lifetime support (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty) 一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内） |
Warning 注意事项 | Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating. 在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。 |
Compliance 认证 | CE Certified CE认证 The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost. 付费可进行TUV(UL61010)或CSA认证 |
Operation instructions 操作指导 | Click to download the operating manual 点击下载说明书
|
- 推荐产品
- 供应产品
- 产品分类